Certification

E2SE’s centrifuges are ATEX certified by INERIS.
News
  • AUGUST 2016
Visite Kuwaït Oil Company
The Kuwait Oil Compagny...

  • SEPTEMBER 2015
    September 30 in Paris

    More...

  • DECEMBER 2013
    POLLUTEC at Paris Villepinte for 26 IIème edition from
    3 au 6 december 2013

    More...

  • JULY 2010

    E2SE intervened in the treatment of BP’s oil slick in ALABAMA, United States

Contact Info
Contacts E2SE - Oil treatment
E.2.S.E. sas.
76320 Saint Pierre les Elbeuf - France
Email: info@e2se.com

Tél  : 33 (0) 2 3537 2171
Fax : 33 (0) 1 7270 3748

PostHeaderIcon Centrifuges

Centrifuge C7300 & C5300

Our high-speed centrifuges are called “disc centrifuge”. They can develop centrifugal forces up to 7300 G.

 These centrifugal machines are particularly adapted for the processing of oily sludge, but can also be configured for other products (food, pharmaceutics…).
 

The walls of the bowl are equipped with calibrated, permanently open holes, called nozzles, which allow the uninterrupted evacuation of decanted solids as well as part of the heavy solid-liquid phase. The solids are transported to the nozzles by the combination of the conveyor screw and the bowl design.

Our centifuges allow the extraction of particle sizes between 0,3 µm and 1 mm.


The interior of the bowl consists of a stack of coaxial conical discs (approximately 100) that are separated by a distance between 0,3 to 0,4 mm. This divides the bowl into a series of fine layers between which the suspension circulates.

Holes perforate the discs in the stack, thus forming a series of vertical channels at the level of the liquid interphase. The light liquid phase circulates centripetically and travels along the upper disc faces until it reaches its evacuation point at the center. The heavy liquid phase’s centrifugal circulation causes it to travel along the lower face of the disc until it surpasses the maximum level of fluid at the top, after which it is evacuated at the center of the bowl.
 

TECHNICAL DATA



TECHNICAL DATA    

C7300

C5300

Centrifugal Force (G)

7300

5300

Bowl speed (rpm)

4600

5000

Hydraulic throughput

15

6

Number of phases

3

3

Light and heavy Liquid outputs

Under pressure, gravity

Under pressure, gravity

Solid/light liquid output

Orifices calibrés

Orifices calibrés

Installed load (kW)

Main motor power

55

22

Lubrification motor Power

0,37

0,37

Oil tank capacity

60

30

Drive system

belts

belts

Size (m)

length :

width:

height:

 

2,20

1,14

2,00

 

1,90

0,90

1,80

Weight (kg)

4500

2000